So i just bought my Xprinter XP-58IIH recently. Although i read some topics here that Loyvese is not supporting this printer however this works perfectly with some of the videos that i watched.
Whenever I am choosing Other Model in the Printer model option it always includes (Ethernet) and i don't have any other option to choose like USB or Bluetooth. I am using iPhone 11 Pro Max with iOS 14.2.
Meanwhile with my husbands mobile which is an Android phone if we choose Other Model in the printer, the interface has the option for Ethernet, Bluetooth & USB.
So, i am thinking that this isn't the issue between the Xprinter that i have and loyverse, but its loyverse and iOS devices.
*Note: I tried using the same iphone and xprinter with Xlabel the bluetooth device is connecting and is working properly. I hope this issue with ios user will be fix soon.
Hope you could help me in this problem. I attached some photos for your reference as well.
Is my SM-T300i mobile bluetooth printer compatible with Loyverse on my IOS device?
By Lotus Cafe staff
Hi there, I have seen T82 tested but I'm not sure if T82 and T82II are different/incompatible. I cannot return the printer once I buy it so I would like to make sure it works with IOS Loyverse on IPAD Air + 24V drawer. Thank all!
Everybody here they use the Star SM-L200 BT printer with the Loyverse? I have a big problem with the graphic mode. The printer print only symbols.
Thank you for your helps
I am currently using Zjiang ZJ-8250 (http://www.zjiang.com/en/init.php/product/index?id=36) with Loyverse in bluetooth mode.
The printer generally works fine, but it prints out gibberish every other receipt. Here is the sequence of the problems.
1. First receipt, the printer prints out and do the auto cut just fine.
2. Second receipt, the printer prints out until the last line of the receipt, but does not feed the receipt out and do the auto cut. (I have to manually pull and tear the receipt.)
3. Third receipt, the printer prints gibberish and do not cut.
The problem seems to be similar to this post:
(Similar in both problem and the printer itself.)
However, I cannot set it to print in text mode as the thread suggested, because I need to print Thai characters. So, I am stuck with image mode.
I have tried with a few esc/pos commands, like resetting the printer, line feed and such with no success.
I tried to find a way to change the printer code page to Thai so that I can try with text mode, but no luck. (Zjiang contact does not response, either.)
Any suggestion would be greatly appreciated.