Jump to content
  • Sign Up

Connection issues with Network printer using Wifi for POS device but only printing sometimes


Mark Jackson
 Share

Recommended Posts

Im using Tm - Tm82 Printer and Have configured the printer 

We have a slightly more complicated network than just one access point, I have wired run a network cable from the server to the priner and can sometimes connect to it with the POS devices. I can ping it from the devices, and can print via the priner settings on my mac, But only sometimes will it actually print recipts.

Can give more details network details if required. Just a noob thing to set up for a Non profit Cafe. 
Any help appreciated 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • By Mogwai
      We are having a problem with both printers , Epson TM20 III, disconnecting.Printers disconnecting
      WEnare using the iOS Loyverse app and the only way to resolve this is to close the app and reopen. Turning the printer on and off does not work. The printers are connected with Ethernet.
      Has anyone had any similar issues or have any suggestions as it would appear to be an issue with the app.
       
      Thanks
    • By Jess
      I guys, i have Epson tm-m30 with ethernet plugged in. Before i was having trouble with error message which i have close the app from the background and then restart the app then it will print out receipt fine for about 5 to 10 mins then error again which i have to repeat the process. I did a search found out that i need to set it static ip and so i did and it does exactly the same things which is so annoying. 
      Does anyone have the same problem? why does it do that? what should i do to sort that problem out? every 5 - 10 mins it will give you error message which i have to delete the app and restart so very often to have the printer print receipt out. Sometime customer ask for the receipt at then end and i have to keep them waiting while i delete the app from the background and restart it to get it to work. Help please! 
    • By Andrew de Freitas
      I know this has been asked a thousand times already... I have followed the instructions to change the printer to "other model" and use the Initial ESC/POS commands as 1C,70,01,00.
      That did not work.
      Saw that someone else recommended using the Hex code for the image in the Initial ESC/POS commands. But I am unable to find the Hex code in the Epson Utility.
      Has anyone gotten it to work with the T88V? or have any other solutions?
       
    • By Abdifatah
      It's possible to print the receipt paper on the Epson Receipt with out Cable?
    • By Europelle SG
      Can this printer be used in Loyverse since it's on Ethernet?

Loyverse Point of Sale

 

 

 

 

×
×
  • Create New...