Hi I use Loyverse POS with two Bluetooth printers A6, one is a normal generic mtp2 printer, and one is peripage printer. Last week all ok but now I can print with peripage through loyverse. If I use peripage app I can print what I want but I can print in loyverse app. I tried unistalling app, unpair print, but not success.
Someone can help me?
Is my SM-T300i mobile bluetooth printer compatible with Loyverse on my IOS device?
Ref: connecting a mobile bluetooth printer in the Loyverse app.
In the Android version of the Loyverse app one can select an "Other" printer and "Bluetooth" connection. The printer works connected to Android devices. I need this functionality to be operational in the IOS version of the Loyverse app. In the IOS app (v10 user) we are not getting similar and flexible printer options for an Other/Bluetooth printer in the Loyverse app. The printer connects to the v10 IOS device and prints. But, the Loyverse app will not connect to the printer. Am I missing something and not seeing the Other/Printer options for IOS?
Do you know if the printer model XPrinter XP-N160II is compatible with Loyverse? Below you can see the technical details of the printer:
Commands ESC/POS Ethernet (RJ45) 80mm paper width Best regards,
I am currently using Zjiang ZJ-8250 (http://www.zjiang.com/en/init.php/product/index?id=36) with Loyverse in bluetooth mode.
The printer generally works fine, but it prints out gibberish every other receipt. Here is the sequence of the problems.
1. First receipt, the printer prints out and do the auto cut just fine.
2. Second receipt, the printer prints out until the last line of the receipt, but does not feed the receipt out and do the auto cut. (I have to manually pull and tear the receipt.)
3. Third receipt, the printer prints gibberish and do not cut.
The problem seems to be similar to this post:
(Similar in both problem and the printer itself.)
However, I cannot set it to print in text mode as the thread suggested, because I need to print Thai characters. So, I am stuck with image mode.
I have tried with a few esc/pos commands, like resetting the printer, line feed and such with no success.
I tried to find a way to change the printer code page to Thai so that I can try with text mode, but no luck. (Zjiang contact does not response, either.)
Any suggestion would be greatly appreciated.